Принцип работы термопринтера и управления нагревом тепловой печатающей головки _ печатного оборудования

Summary the working principle of thermal printer working principle of the thermal printer is equipped with print head semiconductor heating elements, the print head after heating and contact thermal printing paper can print out the need to design, the principle is similar to thermal fax machines. Is the image by heating, chemical reaction and generated in the film. The working principle of the thermal

thermal printers

the working principle of thermal printers print head is equipped with the semiconductor element, the print head after heating and contact thermal printing paper can print out the need to design, the principle is similar to thermal fax machines. Is the image by heating, chemical reaction and generated in the film. The thermal printer chemical reaction is conducted in a certain temperature. High temperature may accelerate the chemical reaction. When the temperature is lower than 60 ℃, the paper takes quite long, even for a few years time to become dark; When temperature is 200 ℃, this will be done within a few microseconds.

about 2 inches of the print head, transverse has 384 plus hot; For 3 'there are 576 plus hot spots. To add hot control be abstracted a cache writes in pairs. Print head inside a cache, the cache with a bit indicates a hot whether heating. So before heating, we need to put the points in the data that will be printed immediately written to the printer by serial buffer. How to write data will not go into here, we assume that the data is written to the cache. At present, to be clear, the data must be written as soon as possible at the start of motor rotates, usually in the start of the first phase, electric will write data at the same time. After the data is written to the cache, not simply by giving a plus hotline and can realize heating power. Tested, about 3 inches of the print head, 576 points at the same time heating will make the current peak reached 11. A, most of the lithium battery can withstand current only about 6 a, a heating power lost is likely to cause the battery to be protected. All the print head will add hot into several groups control respectively. Therefore, at a certain moment, we can only to certain groups of heating. Grouping heating principle is to reduce the instantaneous current ( Reduce some time at the same time heating points) At the same time, also can ensure each basic uniform heating. Due to the limitation of portable printer problems, such as volume, cost, generally there is no constant current power supply device for the print head, so uneven group will lead to the same line in handwriting two-tone. This requires a lot of testing to determine.

Xprinter Group has built its reputation on a commitment to providing quality products and services while rapidly responding to international needs for innovative products.
Xprinter Group will expand our presence in direct selling and lead the reinvention of the channel, offering an entrepreneurial opportunity that delivers superior earnings, recognition, service and support, making it easy and rewarding to be affiliated with Xprinter and elevating the image of our industry.
The barcode and label printer bill receipt printer is an all-servo system capable of storing hundreds of wifi pos printer process parameters to provide custom 58mm thermal receipt printer profiles for each direct thermal label printer type and receipt printer configuration.