Как продлить срок службы ленты принтера? _ Печатное оборудование высокой точности

takeaway: ribbon is the main point of stylus printer consumables, to introduce you to some of the ways to save the ribbon below, can also refer to use other printer.

two printing ribbon box, ready to use color is black, The new change of) Ribbon printing official transcripts, with color shallow ( Used, but the base must be in good condition, otherwise will damage the needle) Ribbon printing informal manuscripts or wax paper.

export position with transparent tape in a box of ribbon ribbon fixed two small piece of foam, the ribbon between two pieces of foam, and foam absorb some good quality printing ink, which can keep the ribbon moist, prolonged use of ribbon.

with two pieces with better quality printing ink absorption of foam grip the ribbon box of the front section of the ribbon, then the light of the rotation of the ribbon shaft, used for a period of time ( With base intact) Add a few ink ribbon ( Ribbon should be added to the root, otherwise when printing color deep shallow differ) , and then open the foil box to add ink ribbon dry ( Add a small amount of gasoline) or in printing ink After use, try to play a few pages of informal draft for uniform distribution of ink, you print the formal version.

form according to the paper thickness adjustment of the distance between the print head to paper habits. Principle is NengDaZeDa, as long as the printing effect is required. For the new ribbon, also can the appropriate distance, when printed tissue paper when color is strong, can ensure the quality of the print.

stencil printing can be lifted when the ribbon. Must not direct stencil printing at this moment, in case the wax melting into the pinhole. Most of the stencil with transparent paper, put it on the stencil printing.

sometimes printing ribbon box of take-up is ineffective, repeated printing ribbon printing needle certain parts, cause the ribbon & quot; Holes & quot; When should first open the foil box, gear and examine whether the metal card a string of bits ( Most is caused by the card card ribbon too loose) 。 For the damage of the ribbon, but with holes cut out part of the implementation & quot; Welding & quot; 。 ” Welding & quot; Alignment method is simple, the interface and a slight overlap, in the inside of the transparent thin tape tight ( Note: in the inside) , if afraid of breaking, but also in the upper and lower outlet along each direction with thin lines on a needle ( Generally the ribbon in the middle period of) 。 I according to the actual circumstances of the ribbon quality and after printing, adopt the method respectively, often can make the use time of a ribbon to extend 1. 5 to 2. Five times as much, greatly reducing the consumption of the ribbon.