Диагностика вас, что не так с _ бумажным принтером для проблем с печатным оборудованием

once receipt printer problems, first of all should be testing is where there is a problem, one is a hardware problem, one is a software problem. Hardware problem 1, close the printer power hold the feed button, and then turn it on, 2 seconds to loosen the feed button, at this time if the test page prints out a printer is no problem.

2, if the printed page, but no words, may be put against the paper roll, the print head row line is not good, or the print head thermal problems.

3, print out the word, the paper also not to come out is the paper round or inside the printer module. This and I will take to repair. 1, open the start program - software problems - - - - - - - - - - - - The control panel - - - - - - - - - - - - - Printers and faxes. Right-click the - - - - - - - - - - - - - - - - - - - Thermal printers - - - - - - - - - - - - - Property - - - - - - - - - - - - - Conventional here are the test page prints out an item, click if can print driver: no problem, if you can't print the below the second solution. 2, if the test page prints out of the first to print, you need to adjust the port or reinstall the printer driver, the first test is the printer port is not set or set has a problem. ( 1) Check the label printer is what kind of printer: A. B parallel printer. C USB printer. So the printer D. A serial port printer

( 2) Parallel printer choose drive the LPT1 port, LPT2, LPT3 as one of them.

( 3) If it is a serial port printer chose COM1, COM2, COM3, and COM4 either of them. ( 4) If it is a USB printer, select the USB drive virtual printer port.

( 5) So if it's a printer, select IP STANDARD TCP/IP one of the two. If it has no IP this item can be added by adding port so a TCP/IP port. And the IP address of the corresponding configuration.

3。 When the port is set up correctly, also still can't print out the test page, then reinstall the printer driver. Set the printer port and in accordance with the above method.